S. No. |
Member |
Designation |
Membership |
1 |
Prof. Maneek Kumar |
Professor & Dean, School of Engineering & Technology |
Chairperson |
2 |
Prof. AK Prasada Rao |
Professor, School of Engineering and Technology |
Member |
3 |
Prof. Sushil Chandra |
Professor of Practice, School of Engineering and Technology |
Member |
4 |
Prof. Nandita Choudhary |
Professor of Practice, School of Engineering and Technology |
Member |
5 |
Dr. Amiya Dash |
Associate Professor, School of Engineering and Technology |
Member |
6 |
Prof. Anantha Rao |
Professor of Practice, School of Engineering and Technology |
Member |
7 |
Prof. Kiran Khatter |
Professor, School of Engineering and Technology |
Member |
8 |
Prof. Ziya Uddin |
Professor, School of Engineering and Technology & Dean Student Welfare |
Member |
9 |
Dr. Rishi Asthana |
Associate Professor, School of Engineering and Technology |
Member |
10 |
Prof. Yarramaneni Sridharbabu |
Professor, School of Engineering and Technology |
Member |
11 |
Dr. Tabish Rasheed |
Associate Professor, School of Engineering and Technology |
Member |
12 |
Dr. Sanmitra Barman |
Associate Professor, School of Engineering and Technology |
Member |
13 |
Dr. Soharab Hossain Shaikh |
Associate Professor, School of Engineering and Technology |
Member |
14 |
Dr. Devanjali Relan |
Associate Professor, School of Engineering and Technology |
Member |
15 |
Dr. Ashok Suhag |
Associate Professor, School of Engineering and Technology |
Member |
16 |
Prof. Yogesh Gupta |
Professor, School of Engineering and Technology |
Member |
17 |
Dr. Abhimanyu Singh Rana |
Associate Professor, School of Engineering and Technology |
Member |
18 |
Dr. Sambhunath Bera |
Associate Professor, School of Engineering and Technology |
Member |
19 |
Dr. Chhayabrita Maji |
Associate Professor, School of Engineering and Technology |
Member |
20 |
Dr. Rajiv Dey |
Associate Professor, School of Engineering and Technology |
Member |
21 |
Dr. Neeraj Sharma |
Associate Professor, School of Engineering and Technology |
Member |
22 |
Dr. Ranbir Singh |
Associate Professor, School of Engineering and Technology |
Member |
23 |
Dr. Anubhav Agrawal |
Assistant Professor, School of Engineering and Technology |
Member |
24 |
Dr. Nirupama M.P |
Assistant Professor, School of Engineering and Technology |
Member |
25 |
Dr. Kiran Sharma |
Assistant Professor, School of Engineering and Technology |
Member |
26 |
Dr. Hirdesh Pharasi |
Assistant Professor, School of Engineering and Technology |
Member |
27 |
Prof. Jaskiran Arora |
Professor & Dean Education & Quality |
Member |
28 |
Prof. Manoj Misra |
Professor, Department of Computer Science and Engineering, IIT Roorkee |
Member |
29 |
Prof. Pankaj Chandna |
Professor, Department of Mechanical Engineering, NIT Kurukshetra |
Member |
30 |
Prof. Kulvir Singh |
Professor, School of Physics and Material Science, Thapar Institute of Engineering and Technology, Patiala |
Member |
31 |
Prof. Ramesh K. Agrawal |
Professor, School of Computer and Systems Sciences, Jawaharlal Nehru University |
Member |
32 |
Dr. Ranu Gadi |
Associate Professor, Department of Applied Sciences and Humanities, IGDTUW, Delhi |
Member |
33 |
Dr. Lipika Dey |
Chief Scientist, Tata Consultancy Services (TCS) Research |
Member |
34 |
Mr. Koushik Sarkar |
President, West Asia at Omya |
Member |
35 |
Mr. Piyush |
BMU Alumni, CSC, 2017 |
Special Invitee |
36 |
Mr. Vivek Reddy |
BMU Alumni, ECE, 2015 |
Special Invitee |
37 |
Mr. Abhishek Agarwal |
BMU Alumni, ME, 2016 |
Special Invitee |
38 |
Mr. Vasudev Raghav |
Student, CSE, 2020 Batch |
Special Invitee |
39 |
Mr. Ramneek Singh |
Student, ME, 2020 Batch |
Special Invitee |
40 |
Mr. Shreyansh Sharma |
Student, E.Comp.E, 2022 Batch |
Special Invitee |
S.no. | Name | Designation | Membership | |
Dean-School of Law | 1. | Dr. Pritam Baruah | Dean, Professor | Chairperson |
All Professors and Associate Professors, and a maximum of two Assistant Professors
|
1. |
Prof. Prabhakar Singh
|
Professor | Member |
2. |
Prof. Arun Sagar
|
Professor | Member | |
3. |
Prof. Adithya Krishna Chintapanti
|
Professor | Member | |
4. | Prof. Vikas Kathuria | Associate Professor | Member | |
5. |
Prof. Saumya Maheshwari
|
Assistant Professor | Member | |
6. | Prof. Akhilendra Pratap Singh | Assistant Professor | Member | |
Three subject experts (mix of academics, industry and research labs) per programme nominated by the Dean. | 1. |
Prof. NS Nigam
|
Professor and Registrar, National law School of India University Bangalore | External Member |
2. | Prof. Anup Surendranath, | Professor of Law, National University Delhi | External Member | |
3. | Ms. Amita Gupta, Katragadda | Partner, Cyril Amarchand Mangaldas | External Member | |
One Professor from another school at BMU | 1. | Prof. Arindam Banerjee |
Professor and Vice Dean, School of Liberal Studies.
|
Member |
Two student Representatives | 1. | Ms. Sameeksha Vaishnav | Students of the 5-year integrated programme | Student Representatives |
2. | Mr. Harshit Grover | Students of the 5-year integrated programme | Student Representative |
S.N. |
Constitution |
Member |
Designation |
Membership |
1 |
Dean-School of Management |
Prof. Pratik Modi |
Professor & Dean, School of Management |
Chairperson |
2 |
All Professors and Associate Professors, and a maximum of two Assistant Professors from each academic programme |
Prof. Jaskiran Arora |
Professor, School of Management and Dean, Education Quality |
Member |
3 |
Prof. Deepak Pandit |
Chair Professor, Institute of Innovation and Entrepreneurship (I2E) |
Member |
|
4 |
Dr. Sangita Dutta Gupta |
Associate Professor, School of Management |
Member |
|
5 |
Dr. Sumedh Kulkarni |
Associate Professor of Practice, School of Management |
Member |
|
6 |
Prof. Davinder Singh |
Professor, School of Management |
Member |
|
7 |
Dr. Prashant Verma |
Associate Professor of Practice, School of Management |
Member |
|
8 |
Dr. Aunsree Paul |
Associate Professor, School of Management |
Member |
|
9 |
Dr. Rik Paul |
Associate Professor, School of Management |
Member |
|
10 |
Dr. Richa Mishra |
Associate Professor, School of Management |
Member |
|
11 |
Dr. Jaya Ahuja |
Assistant Professor, School of Management |
Member |
|
12 |
Dr. Vaishali Sharma |
Assistant Professor, School of Management |
Member |
|
13 |
Minimum of One Professor from the other Schools |
Prof. Maneek Kumar |
Professor & Dean, School of Engineering & Technology |
Member |
14 |
Minimum of two subject experts (mix of academics, industry and research labs) per programme nominated by the Dean. |
Prof. Viswanath Pingali |
Professor, Indian Institute of Management , Ahmedabad |
Member |
15 |
Mr. Jagvinder Singh Brar |
Partner, Forensic Services, KPMG |
Member |
|
16 |
Mr. Sandeep Kohli |
Partner & Talent leader, EY India |
Member |
|
17 |
Dr. Geetraj Singh |
Group Head Organizational Development, Mount Meru |
Member |
|
18 |
Mr. S. V Nathan |
Partner – Deloitte |
Member |
|
19 |
One Alumni to be co-opted by the BOS and nominated by the Dean |
Ms. Rubal Rathi |
Alumni, BML Munjal University |
Member |
20 |
One student per programme normally on the basis of merit and nominated by the Dean, as special invitees. |
Ms. Khushi |
Student 210244; BBA 2021-24 Batch |
Special Invitee |
21 |
Mr. Sourabh |
Student 220217; MBA 2020-2022 |
Special Invitee |
S.no. |
Constitution |
Member |
Designation |
Membership |
1. |
Dean |
Prof. Arindam Banerjee |
Professor & Officiating Dean, School of Liberal Studies |
Chairperson |
2. |
All Professors and Associate Professors, and a maximum of two Assistant Professors |
Dr. Anandini Dar |
Associate Professor |
Member |
3. |
Dr. Christopher Alan Patrick |
Associate Professor |
Member |
|
4. |
Dr. Manu Matthew |
Assistant Professor |
Member |
|
5. |
Minimum of One Professor from other Schools |
Prof. Anirban Chakorborty |
Professor & Dean of Research |
Member |
6. |
Prof. Pritam Baruah |
Professor & Dean, School of Law |
Member |
|
7. |
Minimum of two subject experts (mix of academics, industry, and research labs) per program nominated by the Dean. |
Prof. Honey Oberoi Vahali |
Professor of Psychology (Former Dean, School of Human Studies), Dr BR Ambedkar University Delhi |
Member |
8. |
Dr. Rinku Lamba |
Associate Professor, National Law School of India University, Bangalore |
Member |
|
9. |
Prof. Uday Kumar |
Centre for English Studies, School of Language Literature and Culture Studies, Jawaharlal Nehru University, Delhi |
Member |
The aim of Automation course is to demonstrate how PLC controls communicate with the machines by user defined programs and monitor/control the whole process by means of HMI and SCADA. This lab is equipped with 6 S7-1200 PLCs and 1 S7-1500 PLC with KTP HMI-700 Basic and SCADA system and used to train the trainees about the different hardware arrangements of PLC, application of PLC, HMI and SCADA and the process to program a PLC using different programming languages. PLC has a wide variety of applications in manufacturing industry to automate the conventional arrangement in to automated systems it make ease for manufacturing industry.
The aim of the Mechatronics course is to apply the fundamentals and principle of mechanical, electronics and computer engineering for the integration of automated systems for the ease of production industry. The lab is equipped with two sets of 5-station Industrial application prototypes for understating the application of mechatronic concept. These are used to provide the training on basic concepts and implementation of computers, electronics, mechanical drives and systems, programmable logic controllers, sensors and transducers, hydraulic, pneumatic and electric drives design of mechanical structure and mechanism.
To support faculty in research in Materials Science and Engineering, BMU has created an advanced research facility named the “Center for Advanced Materials and Devices”.
It is equipped with several scientific instruments that are available in some of the renowned universities/ IITs/ Institutes in India. The Center is broadly classified into three research facilities:
This facility generates the capability to design a product and validate the design by automating the process of designing, drawing and analysing with digital tools and curriculum prepared by renowned professionals from SIEMENS PLM. Students can learn and perfect the engineering of conceptualizing and designing a new product right from the scratch and validate it using FEA. The following softwares are installed:
The aim of Automation course is to demonstrate how PLC controls communicate with the machines by user defined programs and monitor/control the whole process by means of HMI and SCADA. This lab is equipped with 6 S7-1200 PLCs and 1 S7-1500 PLC with KTP HMI-700 Basic and SCADA system and used to train the trainees about the different hardware arrangements of PLC, application of PLC, HMI and SCADA and the process to program a PLC using different programming languages. PLC has a wide variety of applications in manufacturing industry to automate the conventional arrangement in to automated systems it make ease for manufacturing industry.
This lab is used to train how to apply the fundamentals and principle of machining, part programming, tooling and production technology for the integration of automated systems for the ease of production industry. The centre has real time CNC controller to provide the training on CNC Turning and Milling. Lab is equipped with two CNC turning kits and 2 CNC Milling Kits and 1 replica of VMC in which trainees use to prepare the coding for the product design and also use SINUMERIC software for virtual training practice.
Pneumatic solutions are increasingly used in all branches of industry and it is also used in the development of automation solutions. This lab has a set of sophisticated Pneumatic/Hydraulics, Electro-Pneumatic and Hydraulics equipment which is used to impart fundamental training, including on the process of designing pneumatic and hydraulic circuits on kit and on Fluid Sim software.
The aim of the Mechatronics course is to apply the fundamentals and principle of mechanical, electronics and computer engineering for the integration of automated systems for the ease of production industry. The lab is equipped with two sets of 5-station Industrial application prototypes for understating the application of mechatronic concept. These are used to provide the training on basic concepts and implementation of computers, electronics, mechanical drives and systems, programmable logic controllers, sensors and transducers, hydraulic, pneumatic and electric drives design of mechanical structure and mechanism.
The Centre is equipped with standard training cells comprising of KUKA (a German manufacturer of industrial robots and solutions for factory automation) KRC-4 industrial robot with required auxiliary equipment. This training cell is capable of performing multitude of operations used for Arc welding, Material handling and Spot welding and other essential operations used by the automobile, food and beverages, packaging and other manufacturing and production industries.
The Centre is equipped with standard training cells comprising of KUKA (a German manufacturer of industrial robots and solutions for factory automation) KRC-4 industrial robot with required auxiliary equipment. This training cell is capable of performing multitude of operations used for Arc welding, Material handling and Spot welding and other essential operations used by the automobile, food and beverages, packaging and other manufacturing and production industries.
The objective of BMU CoE is to develop/enhance the technical skills and competence of the trainees (Engg. Grad. /Under Grad., ITI, Diploma and Industry people) which leads them to enlarge their area of employment opportunity and career in the field of modern industry The Centre is equipped with several scientific instruments that are available otherwise only in some of the renowned institutions of technical learning in India. The Centre is broadly classified into eight facilities:
This lab is designed to enable maintenance personnel to carry out commissioning, calibration and maintenance of the typical devices used for measurements and control in industrial systems. These are equipped with 2 types of industrial Pressure sensor, 3 types of Level sensor, Temperature sensor, 3 types of flow sensor and control valves with smart positioner and PCS7.
These are used to skill the trainees on how to program, calibrate and monitor the sensors using HART and Profibus modules. PCS-7 is used to instruct trainees on how to communicate and program the different industrial sensors and process control equipment and design the SCADA system to monitor and control the process.