School of Management
1. Faculty Advisor of Speak Easy Club
2. Member of Internal Communication Committee
3. Member of UFM committee
Anusree Paul is Associate Professor in Economics in BML Munjal University in School of Management. She is having more than eleven years of teaching and research experience in the field of industrial economics and international trade. She has worked on various projects related to competition policy and economic growth funded by the British High Commission.
She has also worked on various projects on competition regulation in India’s agricultural sector, Zambia’s agricultural sector development, etc. funded by Oxfam International, SAWTEE. Moreover, she was also engaged with various projects of Ministry of Commerce, Government of India in a capacity of consultant.
She has done a certificate course in Economic Analysis of Non-tariff measures from UNCTAD and has worked on a Govt. of India project on Non-tariff measures issues of RCEP countries as a Consultant in Centre for Regional Trade, Indian Institute of Foreign Trade, GoI. She has also worked with Centre for WTO Studies, Indian Institute of Foreign Trade as Consultant on government projects.
She has published many research articles in various national and international peer-reviewed Scopus journals and book chapters in the areas of regional trade agreements of India, competition policy, foreign direct investments, global competitiveness of Indian industries, etc.
She has also presented her original research papers in many national and international seminars and workshops and called for invited lectures for the Indian Statistical Service Probationers of the 40th batch to teach Industrial Statistics.
She has done her Ph.D. in Economics from University of Calcutta and Post Doctoral studies from Centre for International Trade and Development, Jawaharlal Nehru University. Her doctoral thesis was on the technical efficiency analysis of Indian Jute Industry, and the post-doctoral study was on the endogeneity of regional trade agreements.
Her research areas are applied econometrics, international economics, and industrial economics. She is proficient in statistical analysis and software like Stata, EViews, Gretl, Matlab and R (learning). In BMU, she is teaching econometrics, business statistics and mathematics.
| From – To (Year) | Designation & Organization | Core Competency |
|---|---|---|
| August 2018 – June 2019 | Associate ProfessorIndian School of Business & Finance, Affiliated to University of London | Econometrics, Software package -STATA, MATLAB |
| March 2016 – August 2018 | Post- Doctoral FellowJawaharlal Nehru University, India | Econometrics, Software package -STATA, MATLAB |
| July 2010-December 2011, January 2013 – February 2016. | Assistant Professor in EconomicsSymbiosis School of Economics, Symbiosis International University, Pune, Maharashtra | Econometrics, Software package -STATA, MATLAB |
| January 2012- December 2012. | Senior Policy AnalystCUTS International, Jaipur, Rajasthan, India | Econometrics, Software package -STATA, MATLAB |
| July 2009 – June 2010 | Assistant Professor in EconomicsVIT University, Vellore, Tamil Nadu | Econometrics, Software package -STATA, MATLAB |
| November 2007 – June 2009 | Faculty of EconomicsTASMAC (Training and Advanced Studies in Management and Communications Limited) House, Kolkata, West Bengal | Econometrics, Software package -STATA, MATLAB |
| June 2007 – October 2007 | Senior Research AssociateNSHM Business School, Kolkata, West Bengal | Econometrics, Software package -STATA, MATLAB |
Royal Economic Society
American Economic Association
Indian Econometric Society (Life member)
International Development Associates (IDEAs)
Alumni of Economics Department of Calcutta University (AACUED)
Training:
‘Industrial Economics’ on training programme on Industrial Statistics for the Indian Statistical Service Probationers of 41th batch, in National Statistical Systems Training Academy (NSSTA), Ministry of Statistics and Programme Implementation on 20th March 2019.
‘Industrial Economics’ on training programme on Industrial Statistics for the Indian Statistical Service Probationers of 40th batch, in National Statistical Systems Training Academy (NSSTA), Ministry of Statistics and Programme Implementation on 25th January 2018.
South Asian Economic Journal, Sage Publications.
The aim of Automation course is to demonstrate how PLC controls communicate with the machines by user defined programs and monitor/control the whole process by means of HMI and SCADA. This lab is equipped with 6 S7-1200 PLCs and 1 S7-1500 PLC with KTP HMI-700 Basic and SCADA system and used to train the trainees about the different hardware arrangements of PLC, application of PLC, HMI and SCADA and the process to program a PLC using different programming languages. PLC has a wide variety of applications in manufacturing industry to automate the conventional arrangement in to automated systems it make ease for manufacturing industry.
The aim of the Mechatronics course is to apply the fundamentals and principle of mechanical, electronics and computer engineering for the integration of automated systems for the ease of production industry. The lab is equipped with two sets of 5-station Industrial application prototypes for understating the application of mechatronic concept. These are used to provide the training on basic concepts and implementation of computers, electronics, mechanical drives and systems, programmable logic controllers, sensors and transducers, hydraulic, pneumatic and electric drives design of mechanical structure and mechanism.
To support faculty in research in Materials Science and Engineering, BMU has created an advanced research facility named the “Center for Advanced Materials and Devices”.
It is equipped with several scientific instruments that are available in some of the renowned universities/ IITs/ Institutes in India. The Center is broadly classified into three research facilities:
This facility generates the capability to design a product and validate the design by automating the process of designing, drawing and analysing with digital tools and curriculum prepared by renowned professionals from SIEMENS PLM. Students can learn and perfect the engineering of conceptualizing and designing a new product right from the scratch and validate it using FEA. The following softwares are installed:
The aim of Automation course is to demonstrate how PLC controls communicate with the machines by user defined programs and monitor/control the whole process by means of HMI and SCADA. This lab is equipped with 6 S7-1200 PLCs and 1 S7-1500 PLC with KTP HMI-700 Basic and SCADA system and used to train the trainees about the different hardware arrangements of PLC, application of PLC, HMI and SCADA and the process to program a PLC using different programming languages. PLC has a wide variety of applications in manufacturing industry to automate the conventional arrangement in to automated systems it make ease for manufacturing industry.
This lab is used to train how to apply the fundamentals and principle of machining, part programming, tooling and production technology for the integration of automated systems for the ease of production industry. The centre has real time CNC controller to provide the training on CNC Turning and Milling. Lab is equipped with two CNC turning kits and 2 CNC Milling Kits and 1 replica of VMC in which trainees use to prepare the coding for the product design and also use SINUMERIC software for virtual training practice.
Pneumatic solutions are increasingly used in all branches of industry and it is also used in the development of automation solutions. This lab has a set of sophisticated Pneumatic/Hydraulics, Electro-Pneumatic and Hydraulics equipment which is used to impart fundamental training, including on the process of designing pneumatic and hydraulic circuits on kit and on Fluid Sim software.
The aim of the Mechatronics course is to apply the fundamentals and principle of mechanical, electronics and computer engineering for the integration of automated systems for the ease of production industry. The lab is equipped with two sets of 5-station Industrial application prototypes for understating the application of mechatronic concept. These are used to provide the training on basic concepts and implementation of computers, electronics, mechanical drives and systems, programmable logic controllers, sensors and transducers, hydraulic, pneumatic and electric drives design of mechanical structure and mechanism.
The Centre is equipped with standard training cells comprising of KUKA (a German manufacturer of industrial robots and solutions for factory automation) KRC-4 industrial robot with required auxiliary equipment. This training cell is capable of performing multitude of operations used for Arc welding, Material handling and Spot welding and other essential operations used by the automobile, food and beverages, packaging and other manufacturing and production industries.
The Centre is equipped with standard training cells comprising of KUKA (a German manufacturer of industrial robots and solutions for factory automation) KRC-4 industrial robot with required auxiliary equipment. This training cell is capable of performing multitude of operations used for Arc welding, Material handling and Spot welding and other essential operations used by the automobile, food and beverages, packaging and other manufacturing and production industries.
The objective of BMU CoE is to develop/enhance the technical skills and competence of the trainees (Engg. Grad. /Under Grad., ITI, Diploma and Industry people) which leads them to enlarge their area of employment opportunity and career in the field of modern industry The Centre is equipped with several scientific instruments that are available otherwise only in some of the renowned institutions of technical learning in India. The Centre is broadly classified into eight facilities:
This lab is designed to enable maintenance personnel to carry out commissioning, calibration and maintenance of the typical devices used for measurements and control in industrial systems. These are equipped with 2 types of industrial Pressure sensor, 3 types of Level sensor, Temperature sensor, 3 types of flow sensor and control valves with smart positioner and PCS7.
These are used to skill the trainees on how to program, calibrate and monitor the sensors using HART and Profibus modules. PCS-7 is used to instruct trainees on how to communicate and program the different industrial sensors and process control equipment and design the SCADA system to monitor and control the process.
